Plywood & Boards
BWR Plywood in Delhi
BWR (Boiling Water Resistant) plywood handles humidity and occasional splashes better than MR (commercial) plywood, at a lower price than BWP. It is the most common choice for modular kitchens away from the sink, wardrobes and TV units in Delhi homes.
| Grade | BWR / MR (IS:303) |
|---|---|
| Thickness | 6mm - 25mm |
| Sizes | 8x4 ft standard; ask for other sizes |
| Brands | Dawar, Engpar, Goldberg |
Where to use BWR Plywood
- Modular kitchen cabinets away from the sink
- Wardrobes and lofts
- TV units, study tables and beds
- Office furniture
How to choose
- Look for the IS:303 mark and the BWR grade printed on the face.
- Choose MR grade only for dry rooms; choose BWR for kitchens and bathrooms-adjacent walls.
- Check the edges: a solid core without gaps or overlaps holds screws better.
- Ask about the brand's warranty; many BWR sheets carry 15 to 25 years.
BWR: the middle grade most Delhi homes need
BWR (boiling water resistant) sits between MR and BWP. The glue is much stronger than the MR glue used for dry rooms, so the sheet copes with Delhi's humid monsoon months, kitchen steam and the odd spill, but it is not built to stay wet for long.
| MR (commercial) | BWR | BWP / marine | |
|---|---|---|---|
| Glue | For dry interiors | Water resistant | Boiling water proof |
| Standard | IS 303 | IS 303 | IS 303 BWP or IS 710 |
| Good for | Upper-floor bedrooms, offices | Kitchens (away from the sink), wardrobes on outer walls, ground floors | Sink cabinets, vanities, balconies |
| Cost | Lowest | Middle | Highest |
That middle position is why BWR is the sheet most carpenters reach for in a Delhi home: it gives a safety margin over MR for a modest difference in cost, and saves BWP for the few places that really need it.
Where to use BWR, and where not to
Use BWR for:
- Modular kitchen cabinets away from the sink, including wall cabinets above the hob
- Wardrobes and lofts on outer walls, or in any ground-floor room
- TV units, study tables, beds and shoe racks near the entrance
- Office furniture in rooms with air conditioning, where condensation can occur
Don't use BWR for:
- The sink cabinet or bathroom vanity: take BWP plywood or WPC board
- Long shelves that must stay perfectly straight: block board holds its line better over long spans
How a BWR sheet should look
- Stamp: ISI mark, CM/L licence number, IS 303 and "BWR" printed on the face. Verify the CM/L number in the BIS Care app, or use our stamp checker.
- Edge: a tight core without gaps or overlapping veneers. Gaps mean screws have nothing to bite into.
- Thickness: measure it. A sheet sold as 18mm should be close to 18mm, not 16.
- Face: smooth and even for laminate; no deep dents or patches.
How many sheets?
A 6 x 7 ft wardrobe with three plywood shutters takes about four 18mm sheets, two 12mm and two 6mm. A kitchen with 10 ft of base and 8 ft of wall cabinets takes about six 18mm and three 6mm. The sheet calculator works it out for your sizes.
Pair it with
- Laminate outside and liner inside every shutter, so it stays flat: sunmica and laminates
- Edge band tape on every visible edge
- Fevicol Marine for kitchen joints: adhesives
BWR plywood at Nitin Plywood House, Alipur
We deal in BWR plywood from Dawar, Engpar and Goldberg, in 6mm to 25mm, mostly in 8x4 ft sheets. Brand and thickness stock changes often, so call +91-9212017608 to check today's stock and rate. Delivery all over Delhi.
Brands we deal in
- Dawar
- Engpar
- Goldberg
Stock changes often. To check if a brand, grade or size is available today, call Nitin Plywood House, Alipur on +91-9212017608.
Frequently asked questions
What is the difference between BWR and MR plywood?
MR (moisture resistant) plywood is meant for dry interiors. BWR uses a stronger resin that tolerates humidity and splashes, which makes it better for kitchens and wardrobes on outer walls.
Can I use BWR plywood under the kitchen sink?
It will survive occasional splashes, but for the sink cabinet itself BWP is the safer choice because leaks there are constant.
Is BWR plywood waterproof?
No. BWR is water resistant: it tolerates humidity, steam and occasional splashes, which is why it suits kitchens and wardrobes. For places that get wet daily, such as the sink cabinet, use BWP plywood or WPC board.
Which thickness of BWR plywood is used for a wardrobe?
18mm or 19mm for the sides, top, bottom and shutters, 12mm for short shelves and 6mm for the back panel.