Hardware & Tools
Tools & Consumables in Delhi
Everyday carpentry consumables, from TCT saw blades and drill bits to sandpaper, screws, nails and wall plugs, stocked alongside the materials they are used on.
| Includes | Saw Blades, Drill Bits, Sandpaper, Screws, Nails |
|---|---|
| Brands | Tayal, Plumax, Xtra-Power |
Where to use Tools & Consumables
- Cutting plywood and laminate
- Drilling and fixing
- Sanding before polish
- Site and workshop supplies
How to choose
- Use TCT blades for laminated boards to avoid chipping.
- Choose screw length about 2.5 times the thickness of the board being fixed.
- Velcro sandpaper suits orbital sanders; sheets suit hand sanding.
The small items that keep a job moving
A carpenter who runs out of screws or a sharp blade loses half a day. We keep everyday consumables next to the materials they are used on, so they can go in the same delivery as your plywood.
| Item | Used for |
|---|---|
| TCT saw blades | Clean cuts in plywood, MDF, HDHMR and laminated boards |
| Drill bits | Wood, wall and metal drilling |
| Sandpaper | Levelling and smoothing before polish or paint |
| Screws | Furniture assembly and fixing |
| Nails | Frames, backs and site work |
| Wall plugs | Fixing furniture and shelves to walls |
Choosing the right consumable
Saw blades. Laminated and pre-laminated boards chip easily. A fine-tooth TCT blade gives a cleaner cut with less chipping on the laminate face.
Screws. Choose a length of about 2.5 times the thickness of the board being fixed. Fibre boards such as MDF and HDHMR hold better with screws made for them and a pilot hole.
Sandpaper. Start coarse (around 80 to 120) to level, finish fine (around 180 to 220) before polish. Velcro discs suit orbital sanders; sheets suit hand sanding.
Wall plugs. Match the plug to the drill bit and the screw size, and to the wall: brick, concrete or hollow.
Loose or boxed
Screws and nails are available loose and in boxes. Tell us the size and quantity at the counter.
Brands
We stock consumables from Tayal, Plumax and Xtra-Power, among others. To check a particular size or item, call Nitin Plywood House, Alipur on +91-9212017608. For the fittings that go on furniture (hinges, channels, handles, locks), see cabinet and furniture hardware.
Brands we deal in
- Tayal
- Plumax
- Xtra-Power
Stock changes often. To check if a brand, grade or size is available today, call Nitin Plywood House, Alipur on +91-9212017608.
Frequently asked questions
Do you sell screws and nails loose or in boxes?
Both. Ask at the counter or call us with the size you need.
Which saw blade is best for laminated boards?
A fine-tooth TCT blade gives a clean cut with less chipping on laminate.
Which sandpaper grit should I use before polish?
A coarser grit such as 80 or 120 to level the surface, then a finer grit such as 180 or 220 before polish. Ask at the counter for what suits your finish.
What length of screw should I use?
As a rule of thumb, about 2.5 times the thickness of the board being fixed, so the screw reaches well into the second part.