Furniture Banwane Se Pehle Carpenter Se Ye 10 Sawal Zaroor Poochein

Ye sawal kyun zaroori hain?

Ek achha carpenter aapka sabse bada sahara hai – lekin ghar ke furniture mein jo jhagde hote hain, wo zyadatar baat saaf na hone se hote hain: kaunsa plywood, kitni sheet, labour kis hisaab se, hardware kaunsa. Ye 10 sawal kaam shuru hone se pehle pooch lijiye aur jawab likh lijiye (WhatsApp par bhi chalega).

1. "Har hisse mein kaunsa plywood lagega?"

Sirf "achha ply lagega" kaafi nahi. Har hisse ke liye brand, grade aur thickness likhwaiye:

Hissa	Example
Kitchen carcass	19mm BWR, brand ___
Sink cabinet	19mm BWP ya WPC
Shutters	18mm HDHMR ya 19mm BWR
Back panel	6mm
Bedroom wardrobe	19mm MR, back 6mm

Grade samajhne ke liye: Commercial (MR) plywood kya hai aur HDHMR vs Plywood.

2. "Kitni sheet lagengi? Cut list dikhaiye."

Carpenter se sheet count aur cut list maangiye. Andaaza khud lagane ka tareeka: Kitni plywood sheet lagegi?. Agar carpenter ka count aapke andaaze se bahut zyada hai, toh pooch lijiye kyun.

3. "Maal main kharidunga ya aap?"

Dono tareeke chalte hain:

• Aap kharidein: brand aur grade pe poora control, bill aapke naam par (warranty ke liye zaroori). Lekin sheet count sahi hona chahiye.
• Carpenter kharide: aapka time bachta hai. Lekin bill aapke naam par lijiye, aur brand-grade wahi ho jo tay hua tha.

Jo bhi tareeka ho – GST bill zaroor lijiye.

4. "Delivery par sheets kaise check karein?"

Ye sabse kaam ki baat hai. Maal ghar aaye toh:

• Har sheet ka stamp (brand, grade, ISI mark, thickness) dekhiye.
• Ek-do sheets ke stamp ki photo le lijiye.
• Sheets ginti kijiye – bill se milaiye.

Isse kaam ke beech maal badalne ka risk bahut kam ho jaata hai. Pehchan ke tips: Asli vs nakli plywood kaise pehchane.

5. "Labour kis hisaab se lenge?"

Teen common tareeke:

Tareeka	Fayda	Dhyan dein
Per sq ft	Total pehle se pata	Sq ft kaise naapa jaayega – likhwa lijiye
Per din (dihadi)	Chhote kaam ke liye theek	Kaam lamba khinch sakta hai
Poora contract	Ek fixed rakam	Kya-kya shaamil hai – saaf likhwaiye

Jo bhi ho, kya shaamil hai aur kya nahi – laminate lagana, hardware fitting, purana furniture todna, safai – pehle tay kijiye.

6. "Laminate andar bhi lagega?"

Shutter ke bahar 1mm laminate aur andar liner – dono taraf laminate na lagane se shutter tedha ho sakta hai. Poochiye ki rate mein andar ka liner shaamil hai ya nahi. Laminate chunne ke liye: Laminate kaise select karein.

7. "Edge band kahan-kahan lagega?"

Har dikhne wali edge par edge band hona chahiye – khaaskar kitchen mein. Edge band tape kaise chunein.

8. "Hardware kaunsa lagega?"

Hinge, channel, handle – brand aur type likhwaiye: soft close hai ya normal, channel kitne inch ka, sink ke paas SS 304 hai ya nahi. Guide: Hinges aur channel kaise chunein.

9. "Kaam kitne din mein khatam hoga?"

• Shuru aur khatam hone ki tareekh
• Payment ka schedule – advance, beech mein, aur kaam poora hone ke baad
• Aakhri payment fitting check karne ke baad – saare shutter seedhe, drawer smooth, edge band poora

10. "Kaam mein koi problem aaye toh?"

• Kuch mahino tak hinge adjustment ya chhoti repair ke liye aayenge ya nahi?
• Bacha hua maal (sheet ke bade tukde, laminate) kiske paas rahega? – ye aapka paisa hai, aap rakhiye.

Ek page ki checklist

• Har hisse ka brand + grade + thickness likha hua
• Sheet count aur cut list
• Bill aapke naam par (GST)
• Delivery par stamp ki photo
• Labour ka tareeka aur kya shaamil hai
• Laminate bahar + andar liner
• Edge band har dikhne wali edge par
• Hardware brand aur type
• Tareekh aur payment schedule
• Bacha maal aapke paas

Nitin Plywood House, Alipur

Carpenter ki cut list ke saath dukaan aaiye, ya WhatsApp par bhej dijiye. Hum plywood, laminate, edge band, Fevicol aur hardware ek hi GST bill mein dete hain, aur delivery par aap har sheet ka stamp khud check kar sakte hain.

Call / WhatsApp: +91-9212017608